28
Note1:
When using “Clone”, the width of the original layer must not exceed
the half of the main output resolution; the original layer should be at
the left part of the main output, take the middle line of the output
outlet as the symmetry axis, the clone layer is at the symmetry area of
right side.
Note 2:
The cloned layer support mirror and layer suspending, it does not
take up the number of active layers on the machine.
Note 3:
The color key function and shadow function can not be used at the
same time.
Note 4:
Layer setting is only for program output. The AUX output only has 1
full screen layer.
Color Keyer
Color
Keyer
Edit
Pixel
reading
A yellow frame will show up, move it to select the color
should be remove.
RGB value
Display the RGB value which is
selected
Horizontal/vertical
position
Change the horizontal/vertical
parameter to move the yellow
frame, in order to select the color.
Color range fast
setting
After click, remove the color in the
frame; click again to close.
Shadow
Effect
Set the layer effect of shadow(suspending)
Layer 1~4
Select the layer to do the shadow effect
ON/OFF
Turn on/off the shadow effect
Width
Set the width of the shadow, 16 pixels and 32 pixels
Aspect Ratio
According to the input signal resolution scale of the layer, layer width or height stays the
same, reset the layer size, ensure the image display in normal scale.
Layer 1~4
Select the layer
The same width
Width stay the same, auto change the layer height , recover the
image display scale
The same height
Height stay the same, auto change the layer width , recover the
image display scale