27
Layer
Configuration
Set the layer parameter, like size/position, zoom, crop, color key, shadow effect, layer scale.
Size/Position
Layer 1~4
Select the layer
Close/Open
Layer open or close
Horizontal and vertical position
Set the layer horizontal and vertical position
Width and height
Set the layer width and height
Layer clone
Clone the current layer(Please review the notes below)
Mirror clone
Clone and mirror the original layer
Zoom
Layer 1~4
Select the layer
Function on/off
Turn on/off the zoom function
Reset
Reset the layer zoom parameter
Match input signal
Match the layer zoom datum with the input resolution.
Horizontal and vertical position
Set the layer horizontal and vertical position
Width and height
Set the layer width and height
Horizontal and vertical datum
Set the layer zoom datum, the datum of every direction
is the sum of position and size
Layer
Crop/Mask
Layer 1~4
Select the layer to be cropped
Left, right, up, down
Select the start position(4 direction) to crop
Reset
Reset the crop parameter
Keying
Settings
LumaKe
yer
Remove the part of low brightness according to the brightness setting, leave the high
brightness part.
Luma
Range 0~255，set a brightness value, remove the part of
the image where brightness above the value
Edge
Range 0~4， boundary processing, the bigger the value,
the stronger the effect.
Function on/off
Turn on/off the lumakeyer function
Not exchange/exchange
Default not to exchange; after exchange, leave the low
brightness part, remove the high brightness part
Color
Keyer
Quick
Templates
Multiple available templates
Background color mode
Remove the background color which is
selected
Text color mode
Leave the text color which is selected
On/Off
Function on or off
Edit
Customize color keyer, for the top layer, leave the image color within
the setting, remove the image color beyond the setting
Bottom value of RGB
Set a bottom value of RGB, range 0~255
Top value of RGB
Set a top value of RGB, range 0~255
On/Off
Turn on/off the customize color keyer
Swap / No Swap
Default not to exchange; after exchange,
leave the low brightness part, remove the
high brightness part