12
Default state introduction
Turn on the power supply of LED-515, in the process of the system startup, the
LCD front panel would display the start interface on the left screen, when the
start completed, there will show the machine’s current state on the screen as
the following figure shows:
Above the figure, there are 4 lines content, explanation as the following:
Lines
Details
The first line
Picture 1 (main picture, is also default picture) port name and current input
signal resolution.
The second
line
Picture 2 (vice-picture) port name and current input signal resolution.
The third line
State prompt area, by several icons to show the machine current working
state.
There are 8 icons areas from left to right:
1、
Image freeze state area
1、
PIP state area
2、
Picture 1 image intercepting state area
3、
Picture 2 image intercepting state area
4、
PART（part or full screen）state area
Check details in next page.
The fourth
line
Output resolution, check details in “
”[
9]。
In the default state, the third line area of LCD screen is status prompt area, by
several icons to show the machine current working status. Please see the table
below:
