Magnifico MPE423, Руководство по эксплуатации и обслуживанию

Страница: 18 / 24

18
4. What to do if...
4.1 Most common problems
In case of a serious anomaly it is very important to switch-off the equipment, by acting on the multiple
pole switch, and close the gas and water shut-off cocks upstream of the appliance.
Problem
The oven does not start
Check that the multiple pole switch is closed and there is mains voltage.
Check that the gas shut-off cock upstream of the appliance is open.
Check integrity of the oven protection fuses.
Ensure the oven door is correctly closed.
Check to have correctly set the cooking cycle parameters.
Ascertain the oven is not in error.
If after these operations the oven does not start, contact the after-sales assistance.
The fan stops during
functioning
Switch-off the oven and wait for the motor thermal protection to
automatically reset.
Ensure that the cooling inlets are not obstructed.
Should the problem repeat, contact the after-sales assistance.
Internal lighting
does not work
Use lamps resistant to heat.
Replace the lamps as follows:
•
Ascertain that the omnipolar switch upstream of the oven is open and the
appliance is cold.
• Open the internal glass of the oven door.
• Remove the protection glasses of the lamps.
• Replace the lighting lamps.
Should the problem repeat, contact the after-sales assistance.
Water does not flow into
the humidifier tubes
Check that the water shut-off cock is open.
Should the problem repeat, contact the after-sales assistance.
The oven is in “GAS” error
Check that the gas shut-off cock upstream of the appliance is open.
Press the M knob for 1 second
Have a technician check the electric connection sequence is correct and
that a potential difference of 230 V is present between phase and .
Should the oven continue not to work, due to the burners not igniting, contact the after-sales assistance.