Through-Air Radar Transmitter
Read this Manual Before Installing
This manual provides information on the Through-Air
Radar transmitter. It is important that all instructions
are read carefully and followed in sequence. The
QuickStart Installation
instructions are a brief guide to
the sequence of steps for experienced technicians to fol-
low when installing the equipment. Detailed instruc-
tions are included in the
Complete Installation
section of
this manual.
Conventions Used in this Manual
Certain conventions are used in this manual to convey
specific types of information. General technical material,
support data, and safety information are presented in
narrative form. The following styles are used for notes,
cautions, and warnings.
Notes
Notes contain information that augments or clarifies
an operating step. Notes do not normally contain
actions. They follow the procedural steps to which
they refer.
Cautions
Cautions alert the technician to special conditions
that could injure personnel, damage equipment, or
reduce a component’s mechanical integrity. Cautions
are also used to alert the technician to unsafe prac-
tices or the need for special protective equipment or
specific materials. In this manual, a caution box indi-
cates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Warnings
Warnings identify potentially dangerous situations or
serious hazards. In this manual, a warning indicates
an imminently hazardous situation which, if not
avoided, could result in serious injury or death.
Safety Messages
The Through-Air Radar system is designed for use in
Category II, Pollution Degree 2 installations. Follow all
standard industry procedures for servicing electrical and
computer equipment when working with or around high
voltage. Always shut off the power supply before touch-
ing any components. Although high voltage is not pres-
ent in this system, it may be present in other systems.
Electrical components are sensitive to electrostatic dis-
charge. To prevent equipment damage, observe safety
procedures when working with electrostatic sensitive
components.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID: LPN R
9
5
Any unauthorized changes or modifications not
expressly approved by the party responsible for compli-
ance could void user’s authority to operate this equip-
ment.
WARNING!
Explosion hazard. Do not connect or dis-
connect designs rated Explosion-proof or Non-incendive
unless power has been switched off and/or the area is
known to be non-hazardous
Notice of Copyright and Limitations
Copyright © 2002 Magnetrol International,
Incorporated
All rights reserved
Magnetrol reserves the right to make changes to the
product described in this manual at any time without
notice. Magnetrol makes no warranty with respect to
the accuracy of the information in this manual.
Warranty
All Magnetrol/STI electronic level and flow controls are
warranted free of defects in materials or workmanship for
one full year from the date of original factory shipment.
If returned within the warranty period; and, upon factory
inspection of the control, the cause of the claim is deter-
mined to be covered under the warranty; then,
Magnetrol/STI will repair or replace the control at no cost
to the purchaser (or owner) other than transportation.
Magnetrol/STI shall not be liable for misapplication,
labor claims, direct or consequential damage or expense
arising from the installation or use of equipment. There
are no other warranties expressed or implied, except spe-
cial written warranties covering some Magnetrol/STI
products.
Quality assurance
The quality assurance system in place at Magnetrol/STI
guarantees the highest level of quality
throughout the company. Magnetrol is
committed to providing full customer
satisfaction both in quality products and
quality service.
Magnetrol’s quality assurance system is
registered to ISO 9001 affirming its
commitment to known international quality standards
providing the strongest assurance of product/service
quality available.
