When the machine show the calibration menu, please press the key “a+, a-, ALU” ordinal, enter to
the precision data value input menu. First, enter the DF data value menu, show as below Fig.2-3,
please press key “b+ / b-” to increase or decrease the value.
Press key a+,switch to S data value menu, show as below fig.2-5, please press key “b+/b-” to
increase or decrease the value.
Press key a+ again to exit the program.
2.
complete shaft adjustment
2.1
Piezoelectric
sensor
assembly
disassembly/assembly,adjusting and
maintenance method
warning
：
the following operation will destroy the factory assembly, be sure to operate by the
professional
：
The disassembly and assembly steps
：
perpare a 17# open-ended spanner and a 17# sleeve
Press key a+, switch to I data value menu, show as below fig.2
- 4 , please press key “b+/b
- ” to increase or
decrease the
value.
Must be do calibration after finish input data
