Oil Filling
1.
Aim the Oil Outlet to the correct point
2.
Switch on all the cocks and press the knob on the delivery pistol to begin oil delivery.
3.
Close all the switchs and put pump and pipe back to original place.
Maintenance:
1.
The dust in compressed air can slow down and even block the motor cylinder. The following
steps may to prevent this from happening:
a.
Let in 50 grams of Vaseline oil or other lubricator from the air inlet hole weekly
operate the pump for several minutes after having let it into the pump.
b.
Turn on the pump for several minutes until moving parts is fully lubricated.
c.
You may repeat the above operation if necessary.
d.
The above steps should be carried out on a weekly base.
2.
Making sure no water vapour enter the machine from air compressor. For the pumps that are
attached with compressed air treatment equipment, please clear the water retained in the
reservoir of the filter-purger frequently.
3.
For the pumps that are attached with a lubricator, please pay close attention to the lubricator’s
oil level and refill with SAE 20, SAE 30 or antifreeze oil for extreme conditions when
necessary.
4.
The user should perform only routine maintenance operations (such as filters, silencers,
cleaning and etc.) with the pump in order not to damage it or compromise its safety. Contact
our sales and assistance centers OR local distributors should the pump need any further
maintenance.
