Product specific safety precautions
This equipment is designed be operated by qualified personnel. It should only be operated
after reading and understanding the safety warnings and operating procedures in this
instruction manual.
1.
The compressed air must be filtered to avoid dust and vapour into pump inside.
2.
When leaks are found in the equipment or hoses, immediately turn the air pressure off and
repair the leaks.
3.
Do not exceed the recommended operating air pressure, max. pressure 8bar/115PSI.This
could damage equipment. See specification on Page 5
4.
Never point the pistol at people or objects (such as electric boards or moving cars etc.)
5.
Open the pistol by press only after you are sure that the pistol is in the right place so that the
oil doesn’t leak onto the ground.
6.
Always cut off the air supply after use so that oil can’t leak out in case one of the pump’s
components breaks.
7.
Use only original spare parts in case the pump has to be repaired or its components have to e
replaced.
8.
Empty all the oil from the pump in case it has to be disposed of.
9.
When no load, cut off compressed air to stop pump.
10.
Do not throw the oil away. Used oil has to be disposed of according to national
environmental regulations.
11.
The pumps can be used only to deliver lubricants, used oil or antifreeze liquids. Do not use
the pump for any other substance. Please contact us if you have any special request.
12.
Do not use the pump near open flames. Do not smoke during operation. Use in a well
ventilated area.
13.
Keep a type ABC fire extinguisher nearby in case of fires
14.
Always protect your skin and eyes from contact with oil and solvents. (Such as wear oil-
proof gloves and etc.)
