Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 44 of 44
8
DECLARATION OF CONFORMITY
EU Declara on of Conformity Cer
cate
For the following equipment:
Product
:
XLTX/MLTX2 Series Radio Remote Control
Mul ple Listee Model No.
:
XLTX, MLTX2
Manufacturer
’
s Name
:
Magnetek, Inc.
Manufacturer
’
s Address
:
N49W13650Campbell Drive
Menomonee Falls, WI 53051 USA
The undersigned hereby declares on behalf of Magnetek, that the above-referenced product, to which this declara on relates, is in conformity with the
provisions of CE Mark Direc ve (93/68/EEC), Machinery Safety Direc ve (2006/42/EC), ATEX II Direc ve (2014/34/EU), Radio Equipment Direc ve (RED,
2014/53/EU), EMC Direc ve (2014/30/EU), and the ROHS2 Direc ve (2011/65/EU).
The standardsrelevant for the evalua
of the product referenced above conformity to the direc ve requirements are as follows:
EN 301489-17v2.1.1:2009-05
EN 300220-2: v3.1.1:2017-02
EN ISO 13849-1:2008
EN 13557:2003+A2:2008
EN 12100:12100
EN 60529:1992
EN 60079-11:2012
EN 60079-26:2007
EN 60950-1:2006 +A11:2009
+A1:2010 +A12:2011+A2:2013
ATEX spec c informa on:
Product is in conformity with the EC type examina on cer cate:
DEMKO 14 ATEX 1350799X
For Equipment Group and Category:
II 1 G
Type of Protec on:
ia
Explosion Group:
IIC
Temperature Class:
T3 & T4
Issued by the no ed body:
UL Interna onal
Lyskær 8
DK-2730Herlev
Kenn-Nr. / ident. No. 0539
The product has been manufactured, nally inspected and tested under a quality system that has been approved by the no ed body:
UL, LLC
2500West Dundee Road
Northbrook, IL 60062
The European contact for technical documenta on is:
Brian Preston
Magnetek
Unit 3, Bedford Business Center
Mile Road
Bedford, MK42 9TW
United Kingdom
Per Annex II.B of the Machinery Direc ve (2006/42/EC):
The machinery, product, assembly or sub-assembly covered by this Declara on of Conformity must not be put into service un the machinery into which it is to
be incorporated has been declared in conformity with the provisions of the applicable Direc ve(s). This statement is only necessary where the product is to be
incorporated into a machine or system (e.g. a safety component).
Signature of Authorized Person:
Engineering Development Manager
Columbus McKinnon Corpora on
Director of Development
Columbus McKinnon Corpora on
