![background image](http://html1.mh-extra.com/html/magnetek/smart-trac-dm6420/smart-trac-dm6420_engineers-manual_3569793013.webp)
SMART TRAC DM6420 Multi I/O Card
Engineer's Guide EM-3643-0050 Software Configuration
••
9
Software Configuration
The Configuration Procedure
To use the Analog and Digital I/O on your Smart Trac DM6420 Multi I/O card,
you must configure the card's Smart Trac Driver in Smart Trac Workstation
software. You use symbols, created when the driver is installed, to use these I/O
points in function blocks or another IEC 61136-3-compliant programming
language.
To configure the card
:
1. Click
Start
,
Programs
,
MAG-300
,
Control Studio
. Smart Trac
Control Studio loads.
2. A selection box appears listing all established nodes. Click the node for
which you wish to configure the Smart Trac DM6420 Multi I/O card.
3. Click the
Interface Cards
folder to highlight it.
4. Scroll using the up and down arrows to find
DM6420
. Double click it.
The
Edit Interface Card
screen appears.
Figure 4.
The Edit Interface screen.
5. Click
Configure Board
. The
DM6420 Configuration
screen
appears.