Precautions at Wiring
If the cord grip on the top of the pendant does not fit the cable
properly, water or dust may penetrate through the cable grip
and cause damage to the buttons or cause the cranes and
hoists to function improperly.
When cutting or stripping wires, ensure that particles do not fall
into the pendant enclosure.
Use a UL Listed round crimp-style terminal when connecting
the wiring terminal. Do no solder the terminal or connect the
bare wires directly.
Enclosure Disassembly
1. Unscrew pendant cable grip nut.
2. Remove the top cover by loosening its two screws.
3. Remove the back cover by loosening the enclosure screws.
Pendant Control Cable Installation
NOTE: Magnetek recommends the use of a suitable outdoor rated and
oil resistant pendant cable that is both UL Listed and CSA recognized.
When cutting or stripping wires, ensure that particles do not fall into the
enclosure.
1. Feed the cable through the cable grip nut, compression washer,
cable gland grommet, pendant top gasket, pendant top and enclosure
until the cable extends along the entire enclosure length. Then hand
tighten pendant top unit.
2. For ease of cable installation, attach the pendant top to the pendant
enclosure front half, leaving the back off and exposing the switches.
3. Strip back the cable outer jacket to within one inch of the top of the
enclosure.
4. Cut, strip, and terminate each cable conductor.
NOTE: Use a provided or UL Listed closed loop or forked type terminal
lug.
5. Fasten each cable conductor to its respective terminal screw. (Refer
to wiring and marking information on page 12 of this manual.)
6. Code the opposite ends of the cable conductors to ensure proper
wiring.
Parts List
Description
Catalog #
2-Button
2-Button On/Off
SBP2-2-WB
2-Button All Single Speed
SBP2-2-WA
2-Button All Two-Speed
SBP2-2-WS
2-Button All Three-Speed
SBP2-2-WT
4-Button
4-Button-(2) Single-Speed with On/Off
SBP2-4-WB
4-Button-(2) Two-Speed with On/Off
SBP2-4-WBS
4-Button- All Single-Speed
SBP2-4-WA
4-Button- All Two-Speed
SBP2-4-WS
4-Button- All Three-Speed
SBP2-4-WT
6-Button
6-Button-(4) Single-Speed with On/Off
SBP2-6-WB
6-Button-(4) Two-Speed with On/Off
SBP2-6-WBS
6-Button-(4) Three-Speed with On/Off
SBP2-6-WBT
6-Button- All Single-Speed
SBP2-6-WA
6-Button- All Two-Speed
SBP2-6-WS
6-Button- All Three-Speed
SBP2-6-WT
8-Button
8-Button-(6) Single-Speed with On/Off
SBP2-8-WB
8-Button-(6) Two-Speed with On/Off
SBP2-8-WBS
8-Button-(6) Three-Speed with On/Off
SBP2-8-WBT
8-Button- All Single-Speed
SBP2-8-WA
8-Button- All Two-Speed
SBP2-8-WS
8-Button- All Three-Speed
SBP2-8-WT
10-Bu
tto
n
10-Button-(8) Single-Speed with On/Off
SBP2-10-WB
10-Button-(8) Two-Speed with On/Off
SBP2-10-WBS
10-Button-(8) Three-Speed with On/Off
SBP2-10-WBT
10-Button- All Single-Speed
SBP2-10-WA
10-Button- All Two-Speed
SBP2-10-WS
10-Button- All Three-Speed
SBP2-10-WT
12-Bu
tto
n
12-Button-(10) Single-Speed with On/Off
SBP2-12-WB
12-Button-(10) Two-Speed with On/Off
SBP2-12-WBS
12-Button-(10) Three-Speed with On/Off
SBP2-12-WBT
12-Button- All Single-Speed
SBP2-12-WA
12-Button- All Two-Speed
SBP2-12-WS
12-Button- All Three-Speed
SBP2-12-WT