in
tele
Smart2 Instruction Manual
June 2016
Page 37 of 49
Saving the Programming File
Once programming is complete, click the file tab at the top of the RCP screen to open the file menu. File
location and name can be selected from this menu. Old files can be deleted, called up, modified and
renamed by this same menu.
Sending a Program to the inteleSmart2
WARNING
AFTER EVERY PROGRAMMING OF THE RECEIVER, TEST THE UNIT BY UTILIZING THE APPROPRIATE
TRANSMITTER. IF THE RECEIVER DOES NOT RESPOND, DO NOT ACTIVATE A FUNCTION BUTTON! THE
RECEIVER MAY HAVE INCORRECT PROGRAMMING. RE-CHECK THE PROGRAMMING IN THE RECEIVER
AND RETEST. AFTER ACTIVATION OF THE RECEIVER, FUNCTIONALLY TEST ALL COMMANDS ON THE
TRANSFORMER BY INITIALLY JOGGING THE BUTTONS, THEN WITH A FULL MOVEMENT BEFORE
RETURNING TO SERVICE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR
DEATH AND DAMAGE TO EQUIPMENT.
1. Plug in the USB programming cable.
2. Click the send button on the RCP screen. A dialog box will pop up to confirm if the user wants to
proceed. Check the box marked “I accept,” and then click the button “Continue send to radio.” On-
screen prompts will confirm that the receiver has been programmed or if there are any issues.
3. Data will need to be sent separately for the Unit Info, CAN Configuration, and IO screens.
Receiving (Reading) the inteleSmart2 Programming
To read a program file from the in
tele
Smart2:
1. Plug in the USB programming cable.
2. Click “Receive” and follow on-screen prompts.
3. RCP will confirm reception and automatically display current programming in the in
tele
Smart2 unit.
Reading the RCP Software Version
1. Select
“Help.”
2. Select
“About.”
3. RCP Software Version number will be displayed.
Resetting inteleSmart2 Back to Factory Default Settings
This will change the settings and programming to how it was shipped from the factory.
1. Select “Reset to Defaults” button.
2. A dialog box will pop up confirming that the user wants to proceed. Click the button “OK” to restore
the factory default settings. On-screen prompts will confirm that the receiver has been reset to
defaults, or if there are any issues.
3. Power cycle the in
tele
Smart2 to implement the factory default values.