Flex EM/EX HazLoc System Instruction Manual
June 2019
Page 21 of 62
4 Function Settings
4.1 Transmitter Handset
4.1.1
System Channel Settings
Fig. 7
Set the transmitter channel by adjusting the channel dipswitch located on the backside
of the transmitter encoder board
(see Fig. 7)
. Only the first six (6) positions are used for
channel programming
(see Fig. 8)
. The system channels table in
Section 5 on page 47
illustrates which dipswitch setting corresponds to which channel. Once the transmitter
channel is altered, be sure to change the receiver channel as well. The channel on both
the transmitter and receiver must be identical in order for the system to work. To change
the receiver channel,
see Section 4.2.1 on page 34
.
Example:
Fig. 8
The above dipswitch setting
“1 0 0 1 0 0”
corresponds to “channel 36” in the system
channels table in
Section 5 on page 47
.
7
1
4
2 3
5 6
8
CHANNEL
