Flex 8EX / 12EX EU System Instruction Manual
March 2018
Page 31 of 66
4.1.3.3 Inline Pushbutton Configuration (Transmitter Toggle)
The pushbutton arrangement for inline pushbutton setup starts from top to bottom and
then from the right column to the left column (
see Fig. 14
and
Fig. 15
). To set the inline
pushbutton configuration, see JP4 and JP5 jumper settings in
Section 4.2.5 on
page 48
. With inline pushbutton configuration, PB1 and PB2 still correspond to output
relay K1 - K4; PB3 and PB4 correspond to relay K5 - K8, etc.
For 8EX:
Fig. 14
NOTE:
*PB8 is not available on the A/B transmitters
PB5…PB8
Pushbutton number
Normal
Normal momentary contact
LED 1…LED 4
Transmitter toggled with designated LED Display
DIP
PB5
PB6
PB7
PB8*
24
00000000
Normal
Normal
Normal
Normal
25
00000101
Normal
Normal
Normal
LED 4
26
00010100
Normal
Normal
LED 3
LED 4
27
00010101
Normal
LED 2
LED 3
LED 4
28
00010110
LED 1
LED 2
LED 3
LED 4