Enrange MLTX Transmitter Instruction Manual
February 2011
Page 7 of 19
WARNING
THE OPERATOR SHOULD NOT ATTEMPT TO REPAIR ANY RADIO CONTROLLER. IF ANY
PRODUCT PERFORMANCE OR SAFETY CONCERNS ARE OBSERVED, THE EQUIPMENT
SHOULD IMMEDIATELY BE TAKEN OUT OF SERVICE AND BE REPORTED TO THE SUPERVI-
SOR. DAMAGED AND INOPERABLE RADIO CONTROLLER EQUIPMENT SHOULD BE
RETURNED TO MAGNETEK FOR EVALUATION AND REPAIR. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
1.6. Transmitter Unit
Transmitter switches should never be mechanically blocked ON or OFF. When not in use, the
operator should turn the transmitter OFF. A secure storage space should be provided for the
transmitter unit, and the transmitter unit should always be placed there when not in use. This
precaution will help prevent unauthorized people from operating the material handling
equipment.
Spare transmitters should be stored in a secure storage space and only removed from the storage
space after the current transmitter in use has been turned OFF, taken out of the service area and
secured.
1.7. Pre-operation Test
At the start of each work shift, or when a new operator takes control of the crane, operators
should do, as a minimum, the following steps before making lifts with any crane or hoist:
Test all warning devices.
Test all direction and speed controls.
Test the transmitter emergency stop.
1.8. Batteries
WARNING
KNOW AND FOLLOW PROPER BATTERY HANDLING, CHARGING AND DISPOSAL
PROCEDURES. IMPROPER BATTER PROCEDURES CAN CAUSE BATTERIES TO
EXPLODE OR DO OTHER SERIOUS DAMAGE. FAILURE TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
