Enrange CHTX Transmitter Instruction Manual
December 2017
Page 39 of 47
Receiving (Reading) the CHTX Programming
To read a program file from the CHTX transmitter:
1. Insert the USB programming cable and turn on the unit.
2. Click “Receive” and follow the on-screen prompts. RCP will confirm reception and
automatically display current programming in the CHTX unit.
Reading the RCP Software Version
1. Select “Help.”
2. Select “About.” The RCP Software Version number will be displayed.
Resetting CHTX Back to Factory Default Settings
1. Select the “Reset to Defaults” button. A dialog box will pop up confirming that you want to
proceed.
2. Click the “OK” button to restore the factory default settings. On-screen prompts will
confirm that the transmitter has been reset to defaults or will warn of any issues.
3. Power cycle the CHTX transmitter to implement the factory default values.
NOTE:
Resetting the system back to factory defaults restores only the factory settings for the
CAN configuration settings. All other settings will not be altered.
