Magnet PR-9R, Руководство пользователя

Страница: 9 / 20

Functions
1.POWER
Pressing the POWER button once on the front panel or the remote
control will turn the machine on. The LED on the front panel will light up
when the machine in ON. The PR-9R will remain in mute for approximately
10 sec after turning on to allow for component stabilization. The power
LED will be dimly lit while the machine is on MUTE. The LED will be fully
lit when the machine is out of mute and ready to play.
Press POWER again to turn the machine OFF. The LED will fade off when
the power is off.
Remark
The PR-9R has an on-off digital control signal (REMOTE) to turn
the power amplifier ON/OFF with the pre-amplifier.
2.TAPE
Press the Tape switch once to select TAPE input as the source. The
green LED will lit while in TAPE mode. Press TAPE once more to
un-selected TAPE mode.
3.CD/TUNER/LASER/VIDEO/LINE1/LINE2
Turn the select knob to your desired source input.
4.BALANCE
Turning the balance level will lower your output level left/right. Leaving it
in the center will give you equal output on both channels. Sometimes in
unequal source recording, you may need to adjust the balance level to
get a balanced stereo image.
5.VOLUME
Adjust the output level.
PR-9R 9