Magnet PR-9R, Руководство пользователя

Страница: 11 / 20

If the program source is from a VCR, then there is no output at REC (Video)
because the VCR Player cannot play and record at the same time. Video source
can only be recorded to a cassette tape player.
Some audiophiles believe that the higher bandwidth of the VCR tape will
reproduce higher quality audio signal than the conventional cassette tape.
9. TAPE (REC)
Send output signal from selected program source to Cassette
tape input. To record from the program source onto Cassette
tape, turn the selector switch to the source program you wish to
record and press record on the cassette tape player.
OUTPUTS
The PR-9R have 2 outputs for connection to power-amplifier.
10. OUTPUT 2
Sends signals to power-amplifier (use in bi-amp application).
11. OUTPUT1
Sends signals to power-amplifier
12. REMOTE
This is a digital control signal designed to use as remote control
signal to other Magnet power-amplifier with remote turn on
capabilities. With this function, your power-amplifier can be
power ON/OFF with your PR-9R POWER switch.
Connect the cable supplied with the PR-9R into this jack and connect the other
end to Magnet power-amplifier with remote turn on capabilities.
13. AC POWER
Connect the PR-9R to an AC power source only of the type
describe in these operating instruction or as marked on the rear
panel of the unit.
We recommend plugging the cord's outlet end into a grounded 3 hole wall outlet.
Please make sure to have the proper power voltage rating to match with your
PR-9R.
Connect power to your PR-9 with a CE or UL certified power cable only.
PR-9R 11