Magnescale SR27A-AZ Series, Инструкция по эксплуатации

Страница: 50 / 84

18
(E)
SR27A-AZ Series, CH22 Series
7-2. Connection Cables
Model name
Item
CH22-XXXCS CH22-XXXNS
Conduit Included (stainless steel)
No conduit is used 100 m from the
scale head side connector None
Cable sheath PU
(Polyurethane)
(Green) PU
(Polyurethane)
(Green)
Cable length 3, 5, 10, 15 m (standard product),
Supports only 0.1 m units from 1 to 30 m (special-order product)
Terminal processing RJ45 connector made by Yamaichi Electronics (or M12 connector made by
Phoenix Contact when extended)
Protective design grade IP67 (RJ45 connector excluded)
Operating temperature range 0 to +50°C
Storage temperature range –20 to +55°C
Mass Approx. 0.1 kg + 0.15 kg/m
Recommended minimum
bending radius (when there is
repeated bending) 75 mm
Recommended minimum
bending radius (when there is
no repeated bending) Conduit unit: 40 mm, No conduit unit: 35 mm
Dimensions See section 8. “Dimensional Diagrams.”
Th e information here is subject to change without notice. When designing machines, please request the
latest specifi cations from your nearest sales representative.
7-3. Accessories
M4 × 10 Hex. socket-head cap screws 2 (For intermediate foot plate installation)
M4 × 20 Hex. socket-head cap screws 2 (For scale head installation)
M8 × 16 Hex. socket-head cap screws 2 (For scale installation)
M4 Hex. nuts 2 (For scale head rear surface installation)
Spacer: t = 0.1 mm 3
Spacer: t = 1.0 mm 1
Accuracy table 1
Instruction Manual 1