7/9
LY71 with LX71-KR comparator function
If you connect the comparator unit LZ71-KR to LY71, you can set the comparator conditions in the LY71 advanced settings.
5. Comparator function settings (in advanced settings)
Advanced settings of LY71 main unit
Ａ
axis
Ｂ
axis
Ｃ
axis
When the setting is completed, switch to the normal display.
Press key to return to the normal display.
Up to two comparator values can be displayed.
If you set 3 or more comparator values, select
"Auto"
to automatically switch the
comparator value according to the current value.
Note:
When setting two or more comparator values, you must select
"Manual"
for the
first time.
Press the setup key in
the normal count display
Display value is normal display
With either "C" or "L" setting, the output signal is
in the latched state when the latch signal is ON.
(Comparator function)
Press the key several times to set the comparator function
0.5s when passing the positioning point
(positioning function)
O
p
tio
n
U
n
it
S
e
tt
in
gs
About a second later
CMP
Comparator Unit
A-axis
◆
Set the output mode of the data
◆
Specify what to judge
B-axis
key to select
Setting in key
Press the axis selection keys for
each axis to set the functions.
Set up in key
Go to the next section
key to select
Axis 1
Additive axis
Current value
Maximum value
Minimum value
P-P value
Left side
Right side
◆
Display switching can be set
C-axis
key to select
Setting in key
Manual
Automatic
