7/12
LG20 initial Setup Manual
・
Display resolution is set by pressing
key on each axis.
・
A value smaller than the input resolution cannot be selected.
・
Polarity changes with
key
・
To display the diameter (double display), turn on on the
display axis.
NOTE:
Can be used with LG20-1 and LG20-2.
LG20-1, LG20-2
Diameter display
Display resolution
INPUT CHANGE
Display switching
LABEL
Axis label
Length display
How to set up Detailed Settings (1/1)
(continued from Basic Settings)
Step 4
Make the detailed settings.
*If you have already completed the basic settings and want to
reconfigure only the advanced settings, you can do the same.
Basic Settings
Press the setup key
in the normal count display state.
Selection of each display axis and measurement unit input
axis
Upper: input 1
Middle :input 2
Lower: input 3
Display example
LG20-3
Set by select axis key
No compensation
Error compensation off
Linear compensation
Linear Error
Error Setting
Compensation value
Selection of error compensation function
default
Input a correction value of
±
0.600 mm for a distance of 1 m.
Input up to
±
1.000 mm when extended is selected.
～
Normal
Enter with the number keys
Liner Error
Linear compensation
default
D
e
ta
ile
d
S
et
tin
gs
The axis labels for the 1st and 2nd axes
can be selected from "X", "Y", and "Z".
NOTE
