5/12
LG20 initial Setup Manual
How to set up Basic Settings (2/3)
Enter the settings confirmed in "Preparations before making initial settings (1/2)".
Repeat steps (1), (2), and (3) to make the basic settings.
Step 2
(1) Use key to change the basic settings item.
(2) The settings selection can be switched with key on the right side of the counter display.
(3) To define the new value, press key.
COUNTRY
Destination
SIG RES
M
easuring unit resolution
STANDARD
(General area)
U.S.A.
JAPAN
0.5μm
0.1μm
10μm
5μm
1μm
2μm
100μm
50μm
25μm
20μm
default
default
B
a
si
c
S
e
tt
in
gs
Display method:
- For each setting item, the current setting
contents are displayed after about 1 second. If
there is no change in the contents, move to the
next section with key.
