MAGNER 211
Operation Manual
V1.3
Page 9 of 16
Modes shift:
Under main interface, press
Key to switch the counting mode,
from MIX-COUNT to SDC-COUNT, which means mixed counting and
single denomination counting. The display interface is as below:
SDC- COUNT
STOP
VALUE:
0.00
COUNT:
0
B
F:
0
2.00
Under MIX-COUNT mode, all the genuine coins will go to pocket 1;
under SDC mode, press
Key to choose the single denomination
you want to sort, for example €2.00
，
0.50
，
1.00
，
0.20
，
0.05
，
0.10
，
0.02
，
0.01. Based on the denomination you choose, the genuine coins
with the same denomination will go to pocket 1, the other coins will go
to reject pocket.
Data Clear:
·Under main modes interface, press CLR key to clear all counted data.
·Under main modes interface, press
ESC
key to clear rejected coin
record.
Data Memory:
·Under main interface,press M+Key to save the quantity and amount
for genuine coins.It saves the accumulated data of the counting
results
。
Under main interface, when the counting quantity and
amount for genuine coins is 0, you can press M+ key to clear the
saved data.
Data Memory Read:
·Under main modes interface, press MR key to read stored data;
·Under self-learning interface, press M+ Key to read the original
self-learning data, this function is only available for maintenance
people.
