MAGNER 211
Operation Manual
V1.3
Page 11 of 16
quit from BATCH submenu to come back into main menu interface.
When the machine reaches set Batch number, the LCD display will
show as follows:
MIX- COUNT
STOP
VALUE:
20.00
COUNT:
10
F:
2
B
2.00 BATCH OK
For example, if you batch 10pcs for 2.00, when the quantity
reaches 10pcs for 2.00, the machine will stop and show “2.00 BATCH
OK”and flash. At this moment, you need to clear the drawer for 2.00
and press CLR to clear the message, otherwise other key functions are
not workable
.
(2)
VALUE
VALUE SET
VALUE:
CHANNEL:
1
2.00
Under VALUE interface
，
press
，
key to switch the
channel. Under one channel, press SET key to fix the VALUE setting
mode, the VALUE will flash. At this moment, you can change the value
of this channel through pressing numeric key 0 ~ 9. Press CLRkey
，
the setted the value can be cleared to be 0
Notes: The value is already set in the factory and the function is
locked so the user can not change the value.
When one channel Value No. setting is finished, you can come
back to channel number selection interface by pressing SET key and
