-9-
EN
Resume
Press
[STOP
C
]
during playback.
Resume message will appear on
the TV screen.
Press
[PLAY
B
]
, playback will
resume from the point at which
playback was stopped.
Slow Forward / Reverse
Press
[FWD
g
]
or
[REV
h
]
repeatedly
during the pause mode to select the required
forward or reverse speed.
To continue playback, press
[PLAY
B
]
.
Paused and Step-by-Step Playback
Press
[PAUSE
F
]
during playback.
To continue playback, press
[PLAY
B
]
.
The disc goes forward by one frame each time
[PAUSE
F
]
is pressed during the pause mode.
To continue playback, press
[PLAY
B
]
.
Hint
• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8) and (1/2).
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-
back mode are blurred. (Refer to pages 14-15.)
Fast Forward / Reverse Search
Use
[FWD
g
]
or
[REV
h
]
repeatedly dur-
ing playback to select the required forward or
reverse speed.
To continue playback, press
[PLAY
B
]
.
Before: Turn on the TV, amplifier and any other
equipment which are connected to this unit.
Make sure the TV and audio receiver (commer-
cially available) are set to the correct channel.
Functions
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use
[
K
/
L
/
s
/
B
]
to select an item, then
press
[ENTER]
(or
[PLAY
B
]
).
Calling Up a Menu Screen during Playback
•
Press
[MENU]
to call up the DVD menu.
•
Press
[TOP MENU]
to call up the title menu.
1
E
1
Hint
• A “prohibited icon” may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the 2nd
layer. This is not a malfunction.
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
STANDBY–ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
SETUP
TOP MENU
MENU
ENTER
MODE
ZOOM
RETURN
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
PLAY
REV
FWD
STOP
4
3
1
Playback
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pictures in the
pause mode are blurred. (Refer to pages 14-15.)
TIP:
You can change the On-Screen language in “PLAYER MENU” set-
ting. (Refer to page 14.)
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Hint
• To cancel resume, press
[STOP
C
]
one more time during the stop
mode.
• The resume information will be kept even when unit is in standby
mode.
Hint
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), (x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and (x0).
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press
[PAUSE
k
],
[FWD
g
]
or
[REV
h
]
repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
x2(x4) to the zoomed position guide.
Functions
Zoom
1) Press
[ZOOM]
repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2
x4
2) Use
[
K
/
L
/
s
/
B
]
to slide the zoomed picture across
the screen.
) To exit zoom function, press
[ZOOM]
repeatedly to select OFF.
1
Press
[STANDBY-ON]
to
turn on the DVD/CD Player.
2
Press
[OPEN / CLOSE]
and insert a disc with label
facing up.
3
Press
[PLAY
B
]
to start
playback.
4
Press
[STOP
C
]
to stop
playback.
2
2
OPEN/CLOSE
PLAY
STOP
IR
STANDBY-ON
2 3 4 1
2
Lights up when power is on.
MWD200G_E6AA0UD_1UH_V2.indd 9
2006/05/08 11:05:0
