12
Shut off alarm:
When alarm goes off, press the /SOURCE Button to turn off alarm, the alarm
will be reset for next day. (The correspondence alarm indicator will keep illuminate).
To turn off the alarm completely (not reset for next day), press the VOLUME /
AL. 1 (For Alarm 1) or VOLUME / AL. 2 (For Alarm 2) buttons repeatedly
until all correspondence alarm indicators not lit.
SNOOZE:
The alarm can be temporarily turned off manually by press the SNOOZE Button. After
press the button during alarm goes off, the correspondence alarm indicator will blink and
the alarm will turn back on nine (9) minutes later. This feature can be repeated until
the /SOURCE
Button was pressed. (The correspondence alarm indicator will stop
blinking and the alarm will reset for next day).
SLEEP TIMER:
In radio/BT power on mode, press the SNOOZE
Button to activate the sleep function.
Press the SNOOZE Button repeatedly to set sleep timer to 10 - 90 minutes as desired.
To turn off the sleep timer before time up, press and hold the /SOURCE Button
approximately 1 second to turn the unit to standby mode.
ALARM:
Alarm 1 setting:
1.
2.
3.
In standby mode, press and hold the VOLUME /AL. 1 Button until Alarm 1 time
appears on display and blinks.
Press the TUNING /HOUR Button repeatedly to set the hour of Alarm 1 time.
(Make sure the PM Indicator on the display is illuminated if the Alarm 1 time is PM
and not lit if the Alarm 1 time is AM.)
Press the TUNING
/MINU TE Button repeatedly to set minute.
When finished setting, press the VOLUME /AL. 1
Button to save the settings and exit.
The actual time will appears on the display.
After setting, press the VOLUME /AL. 1 Button again, alarm 1 time will appears on
display. Press the VOLUME /AL. 1 Button repeatedly to set the wake up mode to Buzzer
(Alarm 1 Buzzer Indicator will illuminate) or Radio (Alarm 1 Radio Indicator will
illuminate) or turn the alarm Off (Alarm 1 Buzzer & Alarm 1 Radio indicators will not light).
Alarm 2 settings:
Same as Alarm 1 settings. But, press the VOLUME /AL. 2 Button instead of press
VOLUME /AL. 1 Button.
Notes:
If radio was selected to wake up mode, received the desired radio station as previous
instructed before activate alarm. Otherwise, when alarm goes off, no sound output from
the speaker.
Make sure the PM Indicator on the display is illuminated if the Alarm time is PM and not
lit if the Alarm time is AM.
