10
OPERATION
3.
Press the TUNING /MINUTE Button repeatedly to set minute.
4.
5. When finished setting, press the
settings and exit. Time on display will stop blinking.
/PLAY/PAUSE/PRESET/TIME Button to save the
RADIO:
To listening radio:
1. In standby mode, press the /SOURCE Button to turn on the unit. Press the /SOURCE
Button repeatedly until radio frequency (87.5 – 108) appears on the display.
2. Press and holding the TUNING /MINUTE or TUNING /HOUR buttons until the radio
3.
frequency on the display start running to auto search and play the next or previous available
FM station. Repeat the same procedures until the desired FM Station is found.
If the reception is not good, press and release the TUNING /MINUTE or
TUNING /HOUR buttons repeatedly to fine tune.
4.
5.
When listening, press the VOLUME /AL. 1 or VOLUME /AL. 2 buttons repeatedly
to set the volume level as desired.
When finished listening, press and hold the /SOURCE Button approximately 1 second to
turn the unit to standby mode.
Radio stations preset:
Manual preset:
1. Power on the radio and received the desired FM radio station as the previously procedure.
2. Press and holding the /PLAY/PAUSE/PRESET/TIME Button until "P01 - P20" appears
on the display and
blink. Press the TUNING /MINUTE or TUNING /HOUR
/PLAY/PAUSE/PRESET/TIME Button again to store it.
3. Repeat the same procedures until all the desired radio stations were stored into the program
list.
4.
ACTUAL TIME SETTINGS:
To set or reset the actual time:
1. Connect the unit to AC power as previous instructed. The LED Display will illuminate.
Press and holding the /PLAY/PAUSE/PRESET/TIME Button until time on the display
start blinking.
Press the TUNING / HOUR Button repeatedly to set hour.
(Make sure the PM Indicator on the display is illuminated if the time is PM and not lit if
the time is AM.)
buttons repeatedly to select the program number you want stored to. Then press the
2.
5.
After setting, press the /PLAY/PAUSE/PRESET/TIME Button repeatedly to select and
play the desired stored radio station.
When finished listening, press and hold the /SOURCE Button approximately 1 second to
turn the unit to standby mode.
