11
Remote Control:
First time use:
Remove and discard the insulation film as illustrated below:
Replacing the button cell when it is drained as follows:
Push and slide out the button cell holder as illustrated below.
Replace the button cell with new CR2025 button cell with the polarity
markings on the rear of the Remote Control.
Close the button cell holder.
Battery precautions:
Follow these
Battery Precaution
when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a
long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat
and rupture. (Follow battery manufacturer’s instructions.)
