Magnavox MHT983, Руководство пользователя

Страница: 6 / 13

5
POWER SOURCE
POWER SOURCE (Remote Control)
DC IN
AUX IN
LINE IN
R L
REAR VIEW
1.
2.
Connect the small plug from the supplied AC/DC Adaptor to the DC 12V Jack on the rear of
unit. Connect the AC/DC Adaptor into any convenient household outlet has AC 100-240V,
50/60Hz as illustrated below. The STANDBY/AUX IN Indicator on the top of unit will
illuminate.
Notes:
1. The AC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
2. To save energy, unplug the AC/DC Adaptor from wall outlet if not using the unit for
extended periods.
In first time use, slide the insulation film from the battery tray and discard it as illustrated follows:
When the button cell is consumed, replace it as follows:
1. Push the tab on the battery tray and slide it out as illustrated below:
2. Install a new CR 2025 button cell to the battery tray as the polarity makings on the rear of
remote control cabinet.
3. Close the battery tray.