Magnavox H2080MW8, Руководство по обслуживанию

Страница: 17 / 67

1-7-2 E2H00INT
5. When the self-check mode is complete, press [STANDBY-ON] button to turn the power off.
When initializing the HDD & DVD, press [OK] button. Fig. c appears on the screen. After two seconds, the
power is turned off automatically.
Fig. c: Initialize Mode Screen
NOTE: When initializing, “Current Clock”, “Setup Changing Item”, “Channel Setup”, “Area Setup”, “Program” and
“HDD Contents” are initialized.
Table 2: Indication of DVD self-check (*7)
INDICATION DESCRIPTION
OK Connection of DVD is normal.
NOT FOUND DVD drive cannot be found.
CABLE ERROR
FFC cable (connecting to CN401) between the DVD drive and the DVD/HDD MAIN BOARD
is not connected correctly.
Table 3: Indication of HDD self-check (*8)
INDICATION DESCRIPTION
OK Connection of HDD is normal.
NOT FOUND HDD drive cannot be found.
CABLE ERROR FFC cable between the BOARD ATA and the HDD drive is not connected correctly.
Table 4: Available button in self-check mode
BUTTON DESCRIPTION
OK (*9) Initialize (only when the self-check mode is complete)
STANDBY-ON
(*10) Turn the power off (when the self-check mode is complete)
OTHER Not available
Table 5: Description of *11 in Fig. c
INDICATION DESCRIPTION
ENTER Initialization preparation is complete.
WRITING Initializing
OK Initializing is finished normally.
NG Initializing is not finished normally.
"*******" differs depending on the models.
SELF CHECK
DVD CONNECT STATUS : OK
HDD CONNECT STATUS : OK
HDD POWER ON HOURS : 120
BE Ver. :
FE Ver. :
Sub Micon Ver. :
HD4A*****H1E-****
R40_***_***
HD4***TTP
HDD FORMAT : *11 WRITING