Magnavox 40MF401B, Руководство пользователя

Страница: 17 / 33

17
INTR
ODUCTION
PREP
ARA
TION
W
ATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMA
TION
English
TV Speakers
Select the audio output from the unit’s speakers, or not. If your
ampli
fi er is HDMI link function compatible and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using this unit’s remote control.
Make sure
[fun-Link Control]
is set to
[On]
.
➠
p. 22
Use ▲ / ▼ to select the desired option, then press OK .
On The sound will be output from the unit’s speakers.
Off
The sound will not be output from the unit’s
speakers.
Ext. Amp
You can control audio output from your
connected HDMI link devices by using this unit's
remote control.
Note
• We do not guarantee 100% interoperability with other brands of
HDMI link compliant devices.
• [Unmute] may be displayed on the TV screen when you recover
the volume from your ampli fi er.
Primary MTS
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output
mode by pressing
SAP. [Sound Functions]
➠
p. 13
Use ▲ / ▼ to select the desired option, then press OK .
Stereo Outputs stereo-audio.
Mono Outputs mono-audio.
SAP
Outputs second audio program.
Setup
Before you begin:
Make sure the unit is connected to antenna or cable.
1
Use ▲ / ▼ to select the item you want to adjust, then press
OK
.
Picture
Sound
Setup
Features
Language
USB
Autoprogram
Channel List
Add Channels
Antenna
2
Adjust the following items.
Autoprogram
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
1
Use ▲ / ▼ to select [Autoprogram] , then press OK .
2
Use ▲ / ▼ to select an appropriate option, then press OK .
Picture
Sound
Setup
Features
Language
USB
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
Back
Antenna
Cable
Antenna
Cable
Or
ANT.IN
• When connected to VHF / UHF antenna, select [Antenna] .
• When connected to CATV, select
[Cable]
.
• [Autoprogram] will begin.
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to complete.
75%
Digital channels 10 ch
Analog channels 6 ch
MENU
Exit
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
Note
• After setting [Autoprogram] , using CH+ / − on the remote control
skips unavailable programs automatically.
• If you are not receiving a signal from your cable service, contact
the Cable provider.
• If you press or
MENU
during autoprogram, the setup of TV
channels will be canceled.
• Even if
[Autoprogram]
is completed, the channel setting will be
lost if the AC power cord is unplugged before the unit goes into
standby mode by pressing .
• The PIN code will be required once you set a PIN code in the
[Child Lock]
.
➠ p. 20
• If you want to change your PIN code, follow the instruction of
[Change PIN] .
➠
p. 21