U
SING THE
AV1 I
N OR
AV2 I
N
(I
NPUT
) J
ACKS
4
T
he TV’s audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Both the AV
1
and AV2 Input Jack connec-
tions are shown on this page, but either
one can be connected alone. Follow the
easy steps below to connect your accessory
device to the AV
1
and AV2 IN Jacks located
on the back of the TV.
1
Connect the VIDEO (yellow)
cable
to the VIDEO
AV
1
IN
(or
AV2 IN) jack on the back of the TV.
2
Connect the AUDIO (red and
white) cables
to the AUDIO (left
and right)
AV
1
IN
(or AV2 in) jacks
on the rear of the TV.
3
Connect the VIDEO (yellow)
cable
to the VIDEO OUT jack on
the back of the VCR (either one or
two) or accessory device being used.
4
Connect the AUDIO (red and
white) cables
to the AUDIO (left
and right) OUT jacks on the rear of
the VCR (either one or two) or
accessory device being used.
5
Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the CH + or CH- buttons
to set the TV to its AV1or AV2
channel.
(Go to your lowest channel,
for example channel 1, then change
channels down to find the correct
input.)
7
With either of the VCRs (or accesso-
ry devices) ON and a prerecorded
tape (CD, DVD, etc.) inserted,
press
the PLAY button
to view the tape
on the television.
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
3
4
5
7
1
2
2
4
3
5
7
Audio and video cables are not
supplied with the TV, but are avail-
able from Magnavox or electronics
retailers.
H
ELPFUL
H
INT
Audio In
(Red and
White)
VCR Two (or accessory
device) (Equipped with
Video and Audio Output Jacks)
Video In
(Yellow)
Back of VCR
Back of TV
AV
1
Connection
AV2
Connection
VCR One (or accessory
device) (Equipped with Audio
and Video Output Jacks)
