38
English
Repeat A-B Playback
You can Repeat Playback between A and B on a disc.
1
During Playback, press
MODE
repeatedly until
appears.
2
Press
OK
at your desired Starting point (A).
3
Press
OK
at your desired Ending point (B).
• Point B should be in the same Title or Track as point A.
• Within a few seconds, the selection A-B will begin to play back
repeatedly.
4
To Cancel Repeat A-B Playback, press
MODE
repeatedly until
appears.
Press
OK
so
OFF
appears.
Random Playback
This function Shuffles the Playing order of tracks instead of Playback in
the sequence.
1
In Stop mode, press
MODE
repeatedly until
RANDOM
Menu
appears.
2
Press
B
(PLAY) to start Random Playback.
Programmed Playback
You may determine the Order in which Tracks will play back.
1
In Stop mode, press
MODE
repeatedly until the
PROGRAM
Menu
appears.
2
Use
ɼ
ɾ
to Select a desired Track, then press
OK
to Store it.
• Additional Tracks may be on other screens. Use
ɼ
ɾ
to go on
to the Next / Previous pages.
• Repeat this Step until you have selected all the Tracks you wish to
Play back in the program.
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a Program, use
H
¬
/
¬
G
to see All
the Tracks.
3
Press
B
(PLAY) to start Programmed Playback.
Note(s)
• Repeat setting (except
ALL
) will be cleared when moving to another Title or Chapter,
Track.
• During Programmed Playback, Repeat setting will be effective for the Tracks in the
program.
• Repeat Playback or Repeat A-B Playback may not available with some discs.
• Repeat A-B Playback does not function during an other Repeat mode.
• To Cancel Point A, press
CLEAR
at step 2 in
Repeat A-B Playback
.
• Stopping Playback will Cancel Repeat A-B Playback.
Note(s)
• To Repeat the current track in the Rndom mode, follow the steps 1 and 2 in
Repeat Playback
and select
TRACK
.
➟
p.37
• To Repeat the entire Random selections, follow the steps 1 and 2 in
Repeat Playback
and select
ALL
.
➟
p.37
A B
A B
A B
A B
CD
Note(s)
• Press
CLEAR
to Erase the last track in the program if you make an error.
• To Erase all Programmed tracks at once, select
ALL CLEAR
and press
OK
at step 2.
• While a Program is being Played back,
C
works as follows:
– Pressing
C
once: The Track will be in the Resume Standby mode. Next time you
press
B
(PLAY), the Playback will Resume from the Point where it is Stopped in the
Programmed Playback.
– Pressing
C
twice: Resume mode will be Cancelled. Next time you press
B
(PLAY),
Playback will Restart from the First track in the Original order. However, your
Programmed Playback can be Restarted when you follow the above steps. (Your
Programs are still Stored until either the disc is Ejected or the unit goes into Standby
mode.)
– On some discs,
C
will not work while the Resume message appears. Please wait until
the Message disappears.
• To Repeat the current track in the program, follow the steps 1 and 2 in
Repeat Playback
and select
TRACK
.
➟
p.37
• To Repeat the Entire Program, follow the steps 1 and 2 in
Repeat Playback
and select
ALL
.
➟
p.37
• Ejecting the disc or the unit goes into Standby mode will Erase the program.
• You cannot use the Number keys to select another track during Programmed Playback.
Use
H
¬
/
¬
G
to select other tracks in the program.
• You cannot combine Random Playback with Programmed Playback.
• You cannot alter a programmed order during Playback.
• You can start Programmed Playback only while in
PROGRAM
menu.
CD
