Magnavox 19MDTR20 - Dvd-video Player Скачать руководство пользователя

Страница: 379 / 399

2-1-2

N2466FTMEN

Cleaning

Cleaning of Video Head

Clean the head with a head cleaning stick or chamois
cloth.

Procedure

1. Remove the top cabinet.

2. Put on a glove (thin type) to avoid touching the

upper and lower drum with your bare hand.

3. Put a few drops of 90% ethyl alcohol on the head

cleaning stick or on the chamois cloth and, by
slightly pressing it against the head tip, turn the
upper drum to the right and to the left.

Notes:

1. The video head surface is made of very hard

material, but since it is very thin, avoid cleaning it
vertically.

2. Wait for the cleaned part to dry thoroughly before

operating the unit.

3. Do not reuse a stained head cleaning stick or a

stained chamois cloth.

Cleaning of ACE Head

Clean the head with a cotton swab.

Procedure

1. Remove the top cabinet.

2. Dip the cotton swab in 90% ethyl alcohol and clean

the ACE Head. Be careful not to damage the
upper drum and other tape running parts.

Notes:

1. Avoid cleaning the ACE Head vertically.

2. Wait for the cleaned part to dry thoroughly before

operating the unit or damage may occur.

Do Not !

Cleaning Stick

Upper
Cylinder

Video Head

Do Not touch
with your
bare hand!

ACE Head

Содержание 19MDTR20 - Dvd-video Player
















































































































































































































































































































































































































Результаты поиска

Содержание 19MDTR20 - Dvd-video Player

Отзывы:

Похожие инструкции для 19MDTR20 - Dvd-video Player

Бренды по названию

Популярные бренды

Magnavox 19MDTR20 - Dvd-video Player, Руководство по обслуживанию

Результаты поиска

Содержание 19MDTR20 - Dvd-video Player

Отзывы:

Похожие инструкции для 19MDTR20 - Dvd-video Player

Бренды по названию

Популярные бренды