16
Connecting to Your TV Antenna, PC, DVD/VCR etc.
Accessory Pack
Unpack all the parts.
Power cable
Remote control & batteries
Wall mount kit
Audio Chin cable
Setting up and connecting your TV
Ensure that the power to the TV is switched off before the installation.
A) Connecting to PC computer
1. Make sure the external speaker power cable is plugged into the DC 12V OUT connector on the back of the
TV.
2. Connect the power cord to the AC IN power connector on the back of the TV.
3. Connect the 15-pin D-SUB of the video signal cable to the VGA connector on the back of the TV.
Note: If you use an Apple Macintosh
TM
, you need to connect the special Mac adapter to one end of the
monitor signal cable.
