10
GB
Display sequence when repeatedly pressing the RDS button: PS, station frequency, PTY,
RT, CT.
If one of these functions is not supported despite reception of an RDS signal, "N/A" will
appear in the display.
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or
Magnat Audio-Produkte GmbH, Tel.: 02234807-0.
SPECIFICATIONS
FM Tuner
Frequency response:
87.5 – 108 MHz
Signal to noise ratio:
Mono
>75 dB
Stereo
>70 dB
Harmonic distortion:
Mono
<0.30%
Stereo
<0.35%
AM Tuner
Frequency response:
522-1620 MHz
Signal to noise ratio:
>40 dB
Output voltage:
1.8 V (10 kOhm)
Mains voltage:
230 VAC / 50 Hz
Electricity consumption:
Max.
30 W
Standby <1.0 W
Dimensions (wxhxd):
Main device:
430 x 76 x 287 mm
Main device incl. operational
elements/connecting terminals:
430 x 76 x 295 mm
Remote Control:
54 x 140 x 11 mm
Weight:
3.6 kg
Subject to technical change.
For further information please visit our website: http://www.magnat.de.
FUNCTIONS OF THE TUNER
Selecting the tuner band
• Select the FM or AM band using the FM/AM button (remote control or front side of the
MT 420).
• Press the FM-MODE button (remote control) or the STEREO/MONO button (front side
of the MT 420) to switch between mono reception (recommended for poor reception) or
stereo reception.
Station search
• Use the TUNING buttons on the front of the MT 420 or on the remote control:
• Briefly pressing these buttons increases or decreases the tuning frequency by 50 kHz
(FM) or 9kHz (AM).
• Pressing and holding these buttons searches for the next or previous station on the
band.
Station presets
• A total of 40 FM and AM stations can be stored in the memory.
• Select the desired station (FM or AM).
• Press one of the PRESET buttons on the remote control (8) for 2 seconds.
• Choose the desired station number via the numerical buttons on the remote control (9).
• Repeat this procedure to store other stations.
Selecting the preset stations
Press one of the PRESET buttons on the remote control or on the front of the MT 420 to
select the desired station number.
The memory slot can also be selected directly by using the numerical buttons on the remote
control, if you briefly press the DIRECT button (7) first.
Directly selecting a station frequency
Press the DIRECT (7) key on the remote control for two seconds. You may now enter the
desired frequency using the remote control's numeric keypad.
RDS (RADIO DATA SYSTEM) FUNCTIONS OF THE TUNER
RDS is a system which provides information about FM stations that is broadcast together
with the station's signal. The MT 420 can present this information (about the station,
broadcast, etc.) in the display. The RDS functions can be set via the RDS button on the
remote control (6).
RDS functions of the MT 420
RDS-data reception is indicated by the 'RDS' symbol in the display.
• PS (Program Service Name): Displays the name of the programme.
• PTY (Program Type Identification): Displays the type of programme.
• RT (Radio Text): Displays all information for the programme.
• CT (Clock Time): Time