POWER SUPPLY AND CONNECTION
Battery Operation
Set power supply switch to "DC" position.
Remove battery compartment cover.
Insert 8 "c" size batteries, noting the correct polarity as indicated inside the battery
compartment.
Replace the battery compartment cover.
Note:
Check your batteries regularly, old or discharged batteries should be replaced. If the
unit is not going to be used for some time or is being run exclusively on AC power,
remove the batteries to avoid leakage and damage.
To remove batteries from compartment, open the cover and simply shake the unit
gently or place it slightly downward.
Alkaline batteries are recommended to operate this unit
AC Operation
Set power supply switch to "AC" position.
Take the supplied AC Power Cord and connect the corresponding end to household mains
outlet. Make sure the voltage is compatible.
RADIO OPERATION
Operation
Set Function Selector switch to RADIO position.
Select the desired radio frequency band using the Band Selector.
Rotate Tuning Control to move the Dial Pointer to the station frequency you desire.
Adjust Volume Control to the desired level. To turn off the radio, set Function Selector
switch to OFF position.
Antenna
For FM stations, extend the Telescopic Antenna to full length, adjust the angle and direction
for the best reception. Note that AM station signals are picked up through the built-in ferrite
antenna. You may have to orientate the set to obtain the clearest reception.
PLAYING A CD
Getting Started
1. Set the Function Selector switch to CD position. Place a CD, with the label facing up, on
the CD bracket. Close the CD mechanism door.
2. The display will show the total number of tracks on the disc.
3. Do not move or shake the player while it's playing a CD, otherwise it may not function
properly.
General Operation
Play/Pause Button
Press once to start disc playback. The indicator to the bottom right of the track number
indicator will turn on. Press the Play key twice to pause playback temporarily. The indicator
will start to flash. Press the Play key again to resume playback.
Stop Button
Press to stop playback. Total number of tracks will be displayed once again on the LED
display.
4
