4. Connection and Preparation
4.1 Connecting Antenna or Video Facility
1.
Use a 75
Ω
coaxial cable or 300-75
Ω
impedance converter (sold separately) to
plug in the antenna input terminal on the rear of the cabinet.
2.
Connect the video or audio facility with the video, audio interface on the rear of
the cabinet.
4.2 Power Supply
1.
Press on the Power Switch on “1” to power on the LCD TV.
4.3 Battery Installation of Remote-Control Unit
1.
Turn the remote-control unit upside down. Open the battery compartment door.
2.
Install two new 1.5V AAA batteries, make sure the polarity of the batteries
matches the “+”, “–” marks inside the battery compartment.
Note: Improper
installation of batteries may cause them to leak, causing damage.
3.
Close the battery compartment cover.
9
