OPERATING INSTRUCTIONS
1. Turn On/Off
After plugging in the supplied AC adaptor, the Digital Photo Frame automatically turns on and displays
the calendar. To turn the calendar display off, hold down the button until the photo frame turns off.
Press the button again to turn the photo frame back on.
2. Inserting a Memory Card or USB Flash Drive
Gently insert an SD Memory Card, MMC Memory Card, or Memory Stick into the card slot with its
label side facing forward. It is normal for a portion of the Memory Card to remain outside of the Digital
Photo Frame. Please do not try to jam the memory card into the unit.
Gently insert a USB Flash Drive into the USB Input Slot. The USB Flash Drive will only fit in one
direction. Please do not force the USB Flash Drive into the slot; if it is not easily inserting, try inserting
it in the other direction.
Note: When a USB Flash Drive is inserted into this Digital Photo Frame, the USB Flash Drive takes
priority. For example: If you were to insert a Memory Card and a USB Flash Drive, this Digital Photo
Frame will only read the images on the USB Flash Drive.
3. Auto Image Rotation
While in the calendar display, press the SET button 3 times to display the Auto Rotation settings.
Press the button to select Auto Rotation ON or OFF. This will activate or deactivate the auto rotation
feature.
Once activated, you can install the removable stand onto the Digital Photo Frame, orienting it in either
portrait or landscape mode. After adjusting the orientation, the Digital Photo Frame will automatically
adjust the single image on the display 90 degrees to its proper orientation.
Note: Auto Image Rotation is not available in the following modes: Settings Menu, Image Index,
Calendar Display, Slide Show, and Analog/Digital Clock.
There may be occasions when Auto Image Rotation may not properly orient your image. If this occurs,
try rotating the Digital Photo Frame in the opposite orientation, then rotating it back; or placing the
Digital Photo Frame down on a flat stable surface.
4. Calendar / Clock Display
This Digital Photo Frame automatically defaults to the calendar display with slide show images. Press
the button to switch to the clock display. Continue pressing to toggle between the analog and digital
clock. Press the button to return to the calendar display.
Note: In the calendar display, it is not possible to make the slide show images still images.
Basic Settings
6
