to
charge
the
light
using
the
110
volts
socket
Disconnect the head light from the battery pack.
1.
Connect the battery pack to the battery charger.
2.
Plug the one end of the 110 volt adapter into the battery charger and then the
3.
other end into the wall socket.
Turn the battery switch from off to on. This will cause the battery charger LED to
4.
go from green to red (if the battery is discharged).
As the battery charges, the battery charger LED will change from red to amber
to green.
When the battery charger LED turns to green, the battery is fully charged.
5.
Disconnect the various cords and plugs and turn the battery pack off.
6.
to
charge
the
light
using
the
12
volts
cigarette
lighter
plug
:
Follow the same steps above except for step 3. Step 3 for in-vehicle charging: Plug
the one end of the cigarette lighter adapter into the battery charger and then the
other end into the cigarette lighter plug.
Keep switch
on while
charging
For Ac InPut
100v~240v:
For Dc InPut
12v~27v:
AC
100V~240V
AC
12V~27V
Wall
Adapter
Cigarette Lighter
Adapter
Battery
Charger
Battery
Charger
Battery charger LED status
Green
light on: the charger is plug-in or finished charging
red
light on: Charging
c
aution
DO NOT open this lighting equipment as it generates high voltage during operation.
DO NOT touch the front glass or area near the glass after the light is turned on as it
gets extremely hot.
InstructIons
