21
Audio Input
Selecting the Audio Source:
Note: The RV5070 does not control the device,
it just allows the audio to be played through the
system.
Rear Audio Input:
To select the rear audio input, press the AUX
button until “AUX IN” appears in the display.
Refer to the audio device’s owners manual for
proper operation.
Note: When the front 3.5mm audio input
socket is being used the rear audio input is
deactivated.
Front Audio Input:
Insert the 3.5mm jack from the audio device
into the AUX input socket on the front of the
housing. Press the AUX button until “AUX IN”
appears in the display. Refer to the audio
device’s owner’s manual for proper operation.
The LCD display may fail to function normally due
to the vehicle’s battery condition, and could require
resetting the radio microprocessor if:
• The vehicle has been “jump started” from a
dead battery condition.
• The vehicle’s battery becomes very low and is
quick-charged.
• The vehicle’s battery is removed and replaced.
Should any of these conditions occur, simply press
and release the RESET button on the radio front
panel using the tip of a ball point pen. This will reset
the radio microprocessor to the original factory set-
tings. After pressing the RESET button you should
recheck to see if the radio functions normally.
Reset Button
Reset Button
