10
Alarm Operation
Setting the Alarm Timer:
1. Press the ALM button and the clock will
appear in the display with the Hour number
flashing.
2. Rotate the Volume knob until the correct Hour
appears in the display. “ALARM” will appear in
the display indicating the alarm is activated.
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
3. Press the Volume knob and the Minute indi-
cators will start flashing.
4. Rotate the Volume knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing. “ALARM” will appear
in the display indicating the alarm is set.
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the
alarm time to “A AM 12:00”. “ALARM” will dis-
appear in the display indicating the alarm has
been cancelled.
