background image

Model: RV-DOCK

Installation and User Manual

Any model of IPOD with a dock connector can fit perfectly into a single RV-DOCK through the use of Interchangeable Dock Adapters

and an Insert. Dock Housing connects to any cable with a connector.

Installation

The RV-DOCK has 2-way mounting capability: Surface or Dash

mount. The housing can be installed vertically or horizontally.

Choose a mounting location that provides easy access for the

user.

Surface Mounting:

1. Secure the Dock Housing in place by using the supplied

mounting screws. 

2. Attach the IPOD connector to the bottom of the housing. 

Mounting Screws

(supplied)

Dock Housing

Connector Cable (not

supplied)

Dash Mounting:

1. Use the enclosed RV-DOCK-TEMPLATE to mark where you

want to mount the Docking Station. 

Note 1: Make sure there is enough room behind the dash

to mount the Dock Housing.

Note 2: When cutting the hole into the dash make sure

there are no cables or wires that can be accidentally cut.  

2. Secure the Dash-Mount Housing to the Dock Housing

using the supplied screws.

3. Secure the Dock Housing to the dash using the supplied

mounting screws.  

4. Snap-on the Bezel.  

5. Attach the connector to the bottom of the housing. 

4. Snap-on Bezel

3. Mounting Screws

(supplied)

2. Housing Screws

(supplied)

1. Hole in Dash

5. Connector Cable   

(not supplied)

Front

To

p

Vertical Mount

Horizontal Mount

Dash-Mount

Housing

Dock Housing

Отзывы: