10.4" Viewing Screen Controls and Functions
1. Infrared Eye
Point the remote control in the direction of the Infrared Eye
when accessing the functions provided by the remote control.
2. Viewing Screen Release
To release the screen, push inward on the Movievision
TM
logo and pull downward. Place the screen to the desired
viewing position.
To lock the viewing screen in the closed position, press
upward on the edge of the screen housing until the screen
locks into place (you will hear a snap sound).
3. Menu Button:
Press to activate the picture adjustment menu. Press a
second time to change from the picture adjustment menu
to the signal adjustment menu. Press a third time to turn
off the on screen menu .
MENU SEL.
☛
4. Select Button (SEL):
Once the on-screen menu has been activated, press the
SEL button to choose the item you want to adjust.
MENU SEL.
☛
5. Up/Down Buttons:
Once an item has been selected for adjustment, press the
up or down arrows to adjust that item. An adjustment bar
will appear on the screen.
MENU SEL.
☛ ☛
Stereo/Mono Switch
6. Stereo/Mono Switch:
If a condition of interference arises and it can not be reme-
died by selecting another frequency, changing the transmit
mode from “Stereo” to “Mono” usually will eliminate inter-
ference noise. The audio performance will be reduced when
the switch is placed in the “MO” position. Return the
“ST/MO” switch to the “ST” position to re-gain the high
performance stereo sound in the headphones or the
Vehicles stereo system.
9
