12
To test the basic functions of the alarm system repeat the following procedures:
1. Turn off the ignition key and exit the vehicle closing all protected entrances.
2. Press the arm/disarm or lock button on the transmitter. You will hear a siren chirp, the parking lights
will flash one time and the LED status indicator will flash at normal speed.
3. Wait 5 seconds, then open a protected entrance. The siren will begin to sound. Press the arm/disarm or
unlock button once again and the siren will stop sounding. (No Disarm Chirp Indicator)
Note: If you disarm the alarm when the siren is sounding, there are no disarming chirps. When you
disarm the alarm when the siren is off, there will be disarming chirps.
4. Follow procedures 2 and 3 for all other protected entrances.
Step 9: General Testing
About Multiple Car Programming:
Note 1: Regular Carbine transmitters with 2 buttons can operate 2 Carbine alarm systems. (Alarm
models do not have to be the same)
Note 2: Code Hopping Carbine transmitters will only operate 1 Carbine alarm system.
To perform multi-car programming, all transmitters must first be marked to indicate which car/alarm they
are for. ie car #1, car #2 etc. Once this is done, follow the specific programming procedure for each
model alarm you are programming and program the arm/disarm button and CH#2 buttons according
which car they will operate.
Step 8: Multiple Car Programming
