![Magna Telemotive blue PiraT Mini Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/magna/telemotive-blue-pirat-mini/telemotive-blue-pirat-mini_user-manual_3543357022.webp)
blue PiraT Mini
User Guide
Datum: 14.12.2018
Seite 22 von 60
blue_PiraT_Mini_UserManual_V3.4.1.doc
8
Starting the blue PiraT Mini
Connect the
blue PiraT Mini
to the vehicle battery or a power supply via the power harness
(
red/Vbat/+/clamp 30
and
black/GND/-/clamp 31
).
Connect the Gigabit-Ethernet-port
ETH #1 / TSL
with the Ethernet port of your computer by us-
ing a Ethernet cable.
(Note: By default the blue PiraT Mini is configured as *Automatic
DHCP-configuration for TSL
with IP
192.168.0.233*.)
Figure 8.1: Power connection
When the power supply is switched on, the logger will start automatically when you plug in the
power supply.
Is the blue PiraT Mini in standby mode please press the
[ON / Trigger]
button to start the de-
vice.
To switch off the blue PiraT Mini please press the
[ON / Trigger]
button for about 5 seconds till
the green ACTIVE-LED starts pulsing.
The boot sequence takes about 15 seconds, until the logger is reachable by the Telemotive
System Client. Data logging is starting much earlier.
Figure 8.2: Switching on the blue PiraT Mini