Magmaweld TD 355, Руководство пользователя

Страница: 22 / 32

TD 355 is a moving-coil welding machine, designed to weld all type of coated electrodes from 2.0 to 5.0 mm.
Excellent welding performance with cellulosic electrodes.
The equipment is very easy to use, current adjustment is made by just turning the lever in front of the machine
clockwise or counter clockwise and adjusted value of the current is observed by the scale on the machine.
Although it is not an electrically efficient machine, due to its very simple concept, it is down time and operation
costs are very low.
Since there is no electronics involved, the machine can perform great at dusty, humid, corrosive, very hot and
very cold environments. With its telescopic arms and big wheels it can be pulled easily across the working area
especially at outdoor welding sites.
The machine is fan cooled and thermally protected against overheating and phase failures.
TECHNICAL INFORMATION
1. TECHNICAL INFORMATION
1.1 GENERAL EXPLANATIONS
1.2 COMPONENTS OF TD 355
F gure 1: Components of TD 355
1 Power Sw tch
2 Current Adjustment Lever
3 Weld ng Cable Sockets (+ and -)
4 Current Adjustment Ind cator
5 L ft ng Eye
6 Handle
7 Wheel
TD 355 20
5
7
6
4
3
2
1
TD 355
O
I