Magmaweld TD 355, Руководство пользователя

Страница: 18 / 32

TD 355 16
IDENTIFYING SAFETY INFORMATION
Ÿ
These symbols are being used to identify potential risks.
Ÿ
When seen a safety symbol in the manual, it must be understood that there is an injury risk and following
instructions must be read carefully to avoid potential risks.
Ÿ
While welding, keep the third persons and especially the children away from the work area.
UNDERSTANDING THE SAFETY WARNINGS
Read carefully the manual and the labels and the safety warnings on the machine.
Ÿ
Make sure that the warning labels positioned on your machine are in good order. Renew the damaged
and the missing labels.
Ÿ
Learn to operate the machine and how to make the controls properly.
Ÿ
Operate your machine in convenient work areas. Improper modifications affect the safety of your
machine negatively and shorten its lifetime.
SAFETY RULES
ELECTRICAL SHOCK CAN BE FATAL
Installation procedure must comply with national electricity standards and other relevant regulations
and ensure that installation is performed by qualified persons.
Ÿ
Wear dry insulating gloves free of damage and body protection.
Ÿ
Do not touch electrode with bare hand. Do not wear wet or damaged gloves and
body protection.
Ÿ
Do not touch live electrical parts.
Ÿ
Never touch electrode while in contact with working surface, ground or another
electrode which is connected to a different machine .
Ÿ
Protect yourself from electric shock by insulating yourself from work and ground.
Use non-flammable, dry insulating material if possible, or use dry rubber mats,
dry wood or plywood, or other dry insulating material big enough to cover your full
area of contact with the work or ground, and watch for fire.
Ÿ
Never connect more than one electrode to the electrode holder.
Ÿ
Turn off the machine, when not in use .
Ÿ
Disconnect input plug or swi t ch off the power before working on the machine.
Ÿ
Frequently inspect input power cord for damage or bare wiring - repair or replace
cord immediately if damaged.
Ÿ
Be sure that the machine is properly grounded.
HOT PARTS CAN CAUSE SEVERE BURNS
Ÿ Do not touch hot parts.
Ÿ Allow cooling time before servicing.
Ÿ
If needed to hold hot parts, use appropriate tool, insulating gloves and fireproof clothes.
OBEY ALL THE SAFETY RULES
STATED IN THE MANUAL!