Magmaweld ID 500 MW, Руководство пользователя

Страница: 19 / 168

EN
www.magmaweld.com
19 ID 500 M/MW PULSE
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
PAGE 1
Menu language is selected.
Setting Range
•
Turkish
• English
• French
• German
Welding process will be selected.
Setting Range
• MMA
• MIG/MAG
• Pulse (Pulse MIG/MAG)
• D.Pulse (Double Pulse MIG/MAG)
a) LANGUAGE
b) PROCESS
c) MODE
Selecting from the METHOD menu creates a differentiation in the MODE menu options.
You need to adjust your connections and accessories according to the selected welding method. There is a separate outlet for the MMA method in
front of the machine.
If you select your source mode correctly, you will get better welded pieces. For example; the method mode should be selected for the welding proces-
ses where continuous short welding seams will be made.
If you want to see which value the machine originally recommends and return to that value, simply press the adjustment button once.
MMA
Setting Range
• Method
• Set/Carbon
• Rutile / Basic
Pulse (Pulse MIG/MAG)
Setting Range
• Classic
• Smart
• Synergic
D.Pulse (Double Pulse MIG/MAG)
Setting Range
• Classic
• Smart
• Synergic
MIG/MAG
Setting Range
• Classic
• Smart
• Synergic
MIG/MAG
CLASSIC MODE
You can adjust your wire speed and welding
voltage in certain tolerance value ranges.
Wire speed will be adjusted between 1-24 m/
min, welding voltage will be adjusted between
15-40 V.
SMART MODE
When selected, welding parameters such as wire
type, wire diameter, gas type must be selected
correctly. The machine will automatically adjust
the optimum voltage according to the selected
welding current. You can adjust the voltage by
turning the adjustment knob in the +/- direction
within a certain tolerance range.
SYNERGIC MODE
Welding parameters such as wire type, wire dia-
meter, gas type and thickness must be selected
correctly. Both the current and the voltage will
be automatically adjusted according to the
selected welding parameters. The user can na-
vigate both in the current and voltage within
a certain tolerance range. The machine will
automatically recalculate the voltage accor-
ding to the current value set at the specified
tolerance.
When the MIG/MAG welding method is selected in the METHOD menu, the modes will be as follows:
Operation