Magmaweld ID 400 MW, Руководство пользователя

Страница: 26 / 172

26
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
EN
Blank Time
No welding period is set when the method is selected.
Setting Range
• 0.0 - 9.9 sec.
Soft Start
Soft start setting is made.
Setting Range
• On - Off
When starting to weld, the wire speed gradually increases from low speed to the set speed.
In this way, knocks and splashes at the beginning of the welding are prevented.
Crater
Crater function setting is made.
Setting Range
• On - Off
It is the filling process to prevent cracks that will occur at the end of welding. When the
crater is active, the welding current is reduced with a certain linearity at the end of the
welding and the welding ends.
PoF
SoS
Crt
Welding Time
When the method is selected, the welding time is set.
Setting Range
• 0.2 - 9.9 sn.
Pon
Operation